show inline-power fast ports

show inline-power fast ports {port_list}

Description

Displays fast PoE information by port.

Syntax Description


fast	Specifies showing fast PoE power status, which is the ability to provide power to devices at the time of switch power on without waiting for boot up based on last saved PoE state.
ports	Designates showing fast PoE information for specified ports.
`port_list`	Specifies on which ports to show fast PoE information.

Default

All ports are fast PoE disabled by default.

Usage Guidelines

This command shows the port level fast PoE configurations saved in hardware, along with the ones currently configured to allow you to see any mismatches. If the default configuration file has never been saved in this boot session, the hardware configurations shown are the initial running configurations from hardware at boot time. If the default configuration file has been saved in this boot session (by save configuration), the hardware configurations shown are the last configurations saved to hardware.

Example

The following example shows fast PoE information on port 21:

show inline-power fast ports 21 
Port   State   Enable     Operator Limit   Priority   Detection                    Classification
----   -----   --------   --------------   --------   --------------------------   --------------
21     HW      Enabled          32000 mW   Critical   802.3af-only                 802.3at       
       Cfg     Enabled          32000 mW   Critical   802.3af-only                 802.3at

History

This command was first available in ExtremeXOS 30.3.

Platform Availability

This command is available on the PoE devices listed in Extreme Networks PoE Devices.